G7825

G7825

Brief description

• High performance machines with a width of only 900 mm.
• The optimum solution for central and decentralised instrument preparation in hospitals and for laboratory glassware preparation

Performance features

• 10 DIN mesh trays, 4 AN sets, 2-3 MIS sets, 4-5 cataract sets
• 108 narrow necked flasks, 104 pipettes

Construction

• Freestanding appliance, building-in width 900 mm
• Single drop down door
• Spaceframe construction/Frame in 1.4301 grade stainless steel
• External casing in 1.4301 grade stainless steel, grain brushed to 220 grade
• Double insulated for optimum heat and noise absorption

Controls

• Freely programmable Profitronic controls
• 64 programme places
• 17 standard programmes, 8 service programmes, 39 free programme places

Process documentation/Interfaces

• 1 RS 232 interface wtih 9 pole SUB-D plug

Features

• 3-fold filter system with wash cabinet filter, coarse filter and micro-fine filter
• Flow meter counter for control of water intake
• Boiler for heating demin. water
• Boiler capacity: 21 l
• Electrical door lock
• Peak-load cut-out
• Sensors for automatic mobile unit recognition
• Programme failure check
• 2 spare sensors for temperature monitoring and control
• Comprehensive safety features in accordance with EN ISO 15883
• Sensor port
• Emergency release on unclean side

Cleaning technology

• Hygienic freshwater system with water change after each cleaning phase
• Cleaning, disinfection and drying in a closed system
• Thorough surface cleaning of intruments via 2 spray arms
• Injector system for thorough cleanig of hollow instruments

Wash cabinet

• Useable dimensions [mm]: H 683, W 541, D 610
• Useable volume [l]: 225
• Stainless steel: 1.4301
• Cabinet wall thickness [mm]: 1.25

Circulation pumps

• 2 high performance circulation pumps, Qmax. 300/400 l/min

Dispensing systems

• 2 integrated pumps for cleaning and neutralising agent
• Optional: 2 additional dispenser pumps
• Capacity for 3 x 5 litre or 2 x 10 litre containers

Drying

• Optional: Drying unit/side channel condenser, temperature adjustable from 60-115°C and time from 1-240 minutes
• Electric heated, voltage 3N AC 400V 50 Hz, heater rating [kW]: 2 x 3.6, fan rating [kW]: 2 x 0.9, total connected load [kW]: 9
• Pre-filter class EU4, filtration rate >95%, filter life [h]: 200, particle filter class H13, filtration rate >99.992% (DIN EN 1822), filter life [h]: 500
• Air throughput [m3]: 250

Steam condenser

• Optional: heat-exchange steam condenser, connection to cold water or to on-site cold water circuit, water pressure to max. 8 bar, exhaust air temperature reduction to approx. 30-35°C, relative humidity reduction to approx. 60-70%

Plumbing connections

• 1 x cold water 2-10 bar, 1 x hot water 2-10 bar, 1 x DI water 2-10 bar, 3 inlet hoses 1/2" with 3/4" threaded union, inlet hoses 170 cm long
• Dump valve DN 50, on-site odour trap

Connection data

• Heating: Electric
• 3N AC 400V 50Hz, Heating [kW]: 9, total connected load with TA EL or without TA [kW]: 10, fuse rating [A]: 3 x 16

Dimensions/weight

• H (incl. plinth/drip tray and MAV) 2404, W 900, D 750 mm
• Net weight approx. 360 kg (depending on version)

Accessories

• Plinth on rollers SBWR/2
• Plinth SBW/2
• MAV cladding
• Printer PRT/1 for process documentation
• Mieltransfer MF/3
• OXIVARIO kit