PG8527
The PG 8527 washer-disinfector allows large quantities of instruments or glassware to be processed. It has PerfectTouch Controls which are simple to use and easy to clean. The machine can wash 15 DIN mesh trays, 7 AN sets or 3 MIC sets per cycle. The PG8527 is a front loading machine with a lift up door.
Construction
- Freestanding appliance, building-in width 1150 mm
- Single lift-up door
- Spaceframe construction/Frame in 1.4016 grade stainless steel
- External casing in 1.4301 grade stainless steel, grain brushed to 220 grade
- Double insulated for optimum heat and noise absorption
Controls
- Freely programmable Profitronic + controls
- 64 programme places
- 16 standard programmes, 17 service programmes, 31 free programme places
Programmes
Special 93/10, Special 93/10 AN, Vario TD, Vario TD AN, Vario TD Nr, Shoe TD 75/2, Container, Lab Standard, Lab Universal, Lab Intensive, Organic, Inorganic, Chem-Des, Oxivario, Oxivario Plus, Orthovario
Process documentation/Interfaces
- 4 RS 232 interfaces wtih RJ 45 plugs
- 1 RS 232 interface with 9 pole SUB-D plug
- 1 Ethernet network interface with RJ 45 plug for connection to process documentation software
Features
- 3-fold filter system with wash cabinet filter, coarse filter and micro-fine filter
- Flow meter counter for control of water intake
- Optional: Boiler for heating demin water - Boiler capacity: 30 l
- Spray arm monitoring
- Monitoring of dosage volume
- Optional: integrated conductivity measurement
- Electrical door lock
- Peak-load cut-out
- Sensors for automatic mobile unit recognition
- Programme failure check
- 2 spare sensors for temperature monitoring and control
- Comprehensive safety features in accordance with EN ISO 15883
- Sensor port
- Main switch on unclean side
- Optional: full glass door
- Optional: ORTHOVARIO programme
Cleaning technology
- Hygienic freshwater system with water change after each cleaning phase
- Cleaning, disinfection and drying in a closed system
- Thorough surface cleaning of intruments via 2 spray arms
- Injector system for thorough cleanig of hollow instruments
Wash cabinet
- Useable dimensions [mm]: H 675, W 650, D 800
- Useable volume [l]: 332
- Stainless steel 1.4301, optional 1.4404
- Cabinet wall thickness [mm]: 1.25
Circulation pumps
2 high performance circulation pumps, Qmax. 400/600 l/min
Dispensing systems
- 2 integrated bellows pumps for cleaning and neutralising agent
- Optional: 3 additional dispenser pumps
- Capacity for 4 x 10 litre containers
Drying
- Optional: Drying unit/side channel condenser, temperature adjustable from 60-115°C and time from 1-240 minutes
- Electric heated, voltage 3N AC 400V 50 Hz, heater rating [kW]: 2 x 4, fan rating [kW]: 2 x 0.9, total connected load [kW]: 10
- Steam heated, steam pressure [bar]: 2.5-6, filtered saturated steam, max. steam throughput [kg/h]: 15
- 1 pre-filter class EU4, filtration rate >95%, filter life [h]: 200, 4 particle filters class H 13, filtration rate >99.992% (DIN EN 1822), filter life [h]: 1000
- Air throughput [m3]: 250
Plumbing connections
- 1 x cold water 2-10 bar, 1 x hot water 2-10 bar, 1 x DI water 2-10 bar, 3 inlet hoses 1/2" with 3/4" threaded union, inlet hoses 170 cm long
- Dump valve DN 50, on-site odour trap
- Optional: 2 drain pumps DN 22, on-site odour trap, drain hose 125 cm long
Connection data
- Heating: Electric
- Heating: Steam/Electic, convertible
- 3N AC 400V 50Hz, Heating [kW]: 18, total connected load with TA EL or without TA [kW]: 20, fuse rating [A]: 3 x 32
- 3N AC 400V 50Hz, Heating [kW]: 18, total connected load with TA EL or without TA [kW]: 20, fuse rating [A]: 3 x 32, steam connection G 1/2" (DN 10), operating pressure [bar]: 2.5-10, operating pressure with TA D [bar]L 2,5-6, pressurised air connection [bar]: 6-12
- 3N AC 400V 50Hz, Heating [kW]: 8 (with TA EL), total connected load with TA EL [kW]: 9, total connected load with TA [kW]: 2.1, fuse rating [A]: 3 x 16, steam connection G 1/2" (DN 10), operating pressure [bar]: 2.5-10 pressurised air connection [bar]: 6-12
Dimensions/weight
- H (incl. plinth/drip tray and MAV) 2420, W 1150, D 870 mm
- Net weight approx. 570 kg (depending on version)
Accessories
- Plinth on rollers SBWR
- MAV cladding
- Top cover for MAV
- Printer for process documentation
- Mieltransfer MF 27/28
- OXIVARIO kit
- ORTHOVARIO kit
Test certificates
VDE, EMV, MPG CE 0366, IP 20