Service contracts for problem-free operation

We supply Miele approved detergents.

PG8528

Pass Through: 2 Doors
Brand: Miele Professional
Product Code: BBPG8528
Featured Property: Pass Through: 2 Doors
Click for Quote

PG8528

The PG 8528 washer-disinfector allows large quantities of instruments or glassware to be processed. It has PerfectTouch Controls which are simple to use and easy to clean. The machine can wash 15 DIN mesh trays, 7 AN sets or 3 MIC sets per cycle. The PG8528 is a through-feed barrier machine with lift up doors for separation of clean/unclean sides.

Construction

  • Freestanding appliance, building-in width 1150 mm
  • Two lift-up doors
  • Spaceframe construction/Frame in 1.4016 grade stainless steel
  • External casing in 1.4301 grade stainless steel, grain brushed to 220 grade
  • Double insulated for optimum heat and noise absorption

Controls

  • Freely programmable Profitronic + controls
  • 64 programme places
  • 16 standard programmes, 17 service programmes, 31 free programme places

Programmes

Special 93/10, Special 93/10 AN, Vario TD, Vario TD AN, Vario TD Nr, Shoe TD 75/2, Container, Lab Standard, Lab Universal, Lab Intensive, Organic, Inorganic, Chem-Des, Oxivario, Oxivario Plus, Orthovario

Process documentation/Interfaces

  • 4 RS 232 interfaces wtih RJ 45 plugs
  • 1 RS 232 interface with 9 pole SUB-D plug
  • 1 Ethernet network interface with RJ 45 plug for connectionto process documentation software

Features

  • 3-fold filter system with wash cabinet filter, coarse filter and
  • micro-fine filter
  • Flow meter counter for control of water intake
  • Optional: Boiler for heating demin water - Boiler capacity: 30 l
  • Spray arm monitoring
  • Monitoring of dosage volume
  • Optional: integrated conductivity measurement
  • Electrical door lock
  • Peak-load cut-out
  • Sensors for automatic mobile unit recognition
  • Programme failure check
  • 2 spare sensors for temperature monitoring and control
  • Comprehensive safety features in accordance with EN ISO 15883
  • Sensor port
  • Main switch on unclean side
  • Optional: full glass door
  • Optional: ORTHOVARIO programme
  • Conveyer system ATB connection module

Cleaning technology

  • Hygienic freshwater system with water change after each cleaning phase
  • Cleaning, disinfection and drying in a closed system
  • Thorough surface cleaning of intruments via 2 spray arms
  • Injector system for thorough cleaning of hollow instruments

Wash cabinet

  • Useable dimensions [mm]: H 675, W 650, D 800
  • Useable volume [l]: 332
  • Stainless steel 1.4301, optional 1.4404
  • Cabinet wall thickness [mm]: 1.25

Circulation pumps

2 high performance circulation pumps, Qmax. 400/600 l/min

Dispensing systems

  • 2 integrated bellows pumps for cleaning and neutralising agent
  • Optional: 3 additional dispenser pumps
  • Capacity for 4 x 10 litre containers

Drying

  • Optional: Drying unit/side channel condenser, temperature adjustable from 60-115°C and time from 1-240 minutes
  • Electric heated, voltage 3N AC 400V 50 Hz, heater rating [kW]: 2 x 4, fan rating [kW]: 2 x 0.9, total connected load [kW]: 10
  • Steam heated, steam pressure [bar]: 2.5-6, filtered saturated steam, max. steam throughput [kg/h]: 15
  • 1 pre-filter class EU4, filtration rate >95%, filter life [h]: 200, 4 particle filters class H 13, filtration rate >99.992% (DIN EN 1822), filter life [h]: 1000
  • Air throughput [m3]: 250

Steam condenser (model dependent)

Optional: heat-exchange steam condenser, connection to cold water or to on-site cold water circuit, water pressure to max. 8 bar, exhaust air temperature reduction to approx. 30-35°C, relative humidity reduction to approx. 60-70%

Plumbing connections

  • 1 x cold water 2-10 bar, 1 x hot water 2-10 bar, 1 x DI water 2-10 bar, 3 inlet hoses 1/2" with 3/4" threaded union, inlet hoses 170 cm long
  • Dump valve DN 50, on-site odour trap
  • Optional: 2 drain pumps DN 22, on-site odour trap, drain hose 125 cm long

Connection data

  • Heating: Electric
  • 3N AC 400V 50Hz, Heating [kW]: 18, total connected load with TA EL or without TA [kW]: 20, fuse rating [A]: 3 x 32
  • Heating: Steam/Electic (convertible)
  • 3N AC 400V 50Hz, Heating [kW]: 18, total connected load with TA EL or without TA [kW]: 20, fuse rating [A]: 3 x 32
  • steam connection G 1/2" (DN 10), operating pressure [bar]: 2.5-10, operating pressure with TA D [bar]L 2,5-6, pressurised air connection [bar]: 6-12
  • 3N AC 400V 50Hz, Heating [kW]: 8 (with TA EL), total connected load with TA EL [kW]: 9, total connected load with TA [kW]: 2.1, fuse rating [A]: 3 x 16, steam connection G 1/2" (DN 10), operating pressure [bar]: 2.5-10 pressurised air connection [bar]: 6-12

Dimensions/weight

  • H (incl. plinth/drip tray and MAV) 2420, W 1150, D 870 mm
  • Net weight approx. 570 kg (depending on version)

Accessories

  • Plinth on rollers SBWR
  • MAV cladding
  • Top cover for MAV
  • Printer for process documentation
  • Mieltransfer MF 27/28
  • OXIVARIO kit
  • ORTHOVARIO kit

Test certificates

VDE, EMV, MPG CE 0366, IP 20