PG8535
The PG8535 is a compact washer-disinfector for the cleaning, disinfection and drying of laboratory glassware and medical instruments. It has PerfectTouch Controls which are simple to use and easy to clean. The machine can process 37 narrow-necked glasses, 96 pipettes or 1600 test tubes per cycle. It has an integrated hot-air drying unit and drawer for two supply containers. It is used for reprocessing laboratory glassware used in analytical experiments in industry, environmental and research laboratories, biology and pharmaceuticals and for instrument reprocessing in hospitals and outpatient surgeries. This machine features freely programmable Profitronic+ controls allowing the compilation of user-specific programmes.
Performance features
- 4 DIN mesh trays, 2 AN sets, 1-2 MIS sets, 48 GYN speculae
- 37 narrow necked flasks, 96 pipettes, 1600 test tubes
Construction
- Freestanding/built-under without lid
- 90 cm wide
- External finish: Stainless steel (AE)
Controls
- Freely programmable PROFITRONIC+ controls with wide range of programming options, user-specific programmes, 4-line display with user navigation in local language, A0 controls
- PROFITRONIC+ controls with 16 standard cleaning and disinfection programmes, 7 service programmes, 41 vacant programme slots
- Automatic mobile unit recognition
- Spray arm control monitors spray arm rotation, protects against loading errors and a build-up of foam in the hydraulic circuit
Process documentation
- Network interface for process documentation
- Serial printer interface (RS232) for process documentation
Cleaning technology
- Hygienic freshwater system with water change after each cleaning phase
- Thorough cleaning via 2 spray arms (3rd spray arm in the upper basket)
- Optimally allocated spray nozzles and selectable spray arm rotation for the best possible cleaning result
- Injector system for thorough cleaning of hollow instruments
Standard features
- 4-fold filter system with flat filter, coarse filter, glass shard filter and micro-fine filter
- Flowmeter counter for control of water intake
- 2 spare sensors for temperature monitoring and control
- Comprehensive safety features in accordance with EN 1SO 15883
- Peak load cut-out
Wash cabinet
- Wash cabinet made from high quality stainless steel
Circulation pumps
- High performance circulation pump Qmax. 400l/min
Dispensing systems
- 2 integrated dispenser pumps for neutralising / cleaning agent
- 1 connection for dispenser module DOS G10 for liquid cleaning or neutralising agent
- Drawer for 2 x 5 litre containers
Water softener
- Profi monobloc water softener
Steam condenser
- Efficient aerosal steam condenser
Drying
- Integrated hot air drying unit
- Fan: 0.3 kW, heater bank: 2.3 kW, total connected load: 2.6 kW, air throughput: 55 m3 /h, temperature adjustable in 1°C increments: 60-115°C ,time adjustable in 1 minute increments: 1-240 minutes, preliminary filter EU4, filtration rate >95%, filter life 100h, particle filter/Hepa filter H13, filtration rate >99.992% (DIN EN 1822), filter life: 500h
Plumbing
- 1 x cold water (CW)
- 1 x cold water for steam condenser
- 1 x Hot water (AW)
- 1 x AD water (AD)
Drainage
Electrical connection
- 3N AC 400V 50Hz
- Fuse rating [A]: 3 x 16
- Total connected load [kW]: 9.7
- Heater rating [kW]: 9.0
Accessories
- Stainless steel lid
- Dispenser modules for liquid media
Dimensions / weight
- External dimensions H/W/D [mm]: 820/900/700
- Net weight [kg]: 114
Test marks
- MDD CE 0366
- VDE
- VDE-EMV
- IP 20